Hot line
Contact us
021一57733878 021一54385897
Fast entry
Copyright:Shanghai Minyu Industrial Co.,Ltd. | Copyright - 2019 All Rights Reserved. Powered by www.300.cn 沪ICP备11047403号
Mobile phone QR code
PRODUCTS CENTER
0.02 standard wide range piston pressure gauge
0.02 standard wide range piston pressure gauge (0.02 grade)
Technical indicators are better than JJG59-2007 national metrological verification procedures
model |
Measuring range (MPa) |
Nominal range (MPa) |
KY0.6 |
0.04~0.6 |
0.04~0.6 |
KY6 |
0.1 to 6 |
0.1 to 6 |
KY25 |
0.5 to 25 |
0.5 to 25 |
KY60 |
1 to 60 |
1 to 60 |
KY100 |
1(2)~100 |
1(2)~100 |
level of accuracy |
0.02 level |
|
Working medium |
The upper limit of 25MPa or less uses transformer oil and kerosene mixed oil; the upper limit is more than 25MPa (including 25MPa) using di(2-ethylhexyl) sebacate |
|
Piston material |
Tungsten carbide |
|
Weight material |
stainless steel |
|
Basic error |
The basic error over the entire measurement range is ±0.02% of the actual measured pressure. |
|
use |
Can be used to test piston pressure gauges, float pressure gauges, pressure sensors, pressure transmitters, digital pressure gauges and other precision pressure gauges |
Technical features:
● The measuring range is wide. When the lower limit is 1MPa, the basic error is ±0.02%. It can be seen that one KY100 pressure gauge can be used against the current domestic measuring upper limit of 6, 60, 100MPa three pressure gauges.
● The piston and cylinder are made of tungsten carbide with high strength, high hardness and low temperature coefficient of expansion. After calculation, the deformation error is negligible; the working environment temperature can be relaxed to 20±5°C; the performance is very stable.
● The piston and the piston barrel are finely ground, and the roundness error and the gap are extremely small. Because the viscosity of the pressure transmitting medium used in domestic pressure gauges is (900-1100) mm2/s, and the viscosity is very small, The viscosity of the bis(ethylhexyl) sebacate specified in the international high pressure comparison is (20-25) mm 2 / s as the pressure transmitting medium, thus ensuring the sensitivity of the pressure gauge.
● The load has a low center of gravity, the piston runs smoothly, and the pressure fluctuation is extremely small.
● The sealing structure is novel in design and excellent in performance.
● Pre-pressure pump, pressure regulator, valve, pressure guiding tube, etc. are reliable, light and beautiful, and easy to use.
The certificate of China Institute of Metrology or Shanghai Metrology and Testing Institute is attached to the factory.
Phone:021一57733878 54385897
Fax:021一57733879一802
Hotline