Hot line
Contact us
021一57733878 021一54385897
Fast entry
Copyright:Shanghai Minyu Industrial Co.,Ltd. | Copyright - 2019 All Rights Reserved. Powered by www.300.cn 沪ICP备11047403号
Mobile phone QR code
PRODUCTS CENTER
0.01 standard wide range piston pressure gauge
0.01 standard wide range piston pressure gauge (KY0.6, KY6, KY25, KY60, KY100, KY160)
Technical indicators are better than JJG59-2007 national metrological verification procedures
model |
Measuring range (MPa) |
Nominal range (MPa) |
KY0.6 |
0.04~0.6 |
0.04~0.6 |
KY6 |
0.1 to 6 |
0.1 to 6 |
KY25 |
0.5 to 25 |
0.5 to 25 |
KY60 |
1 to 60 |
1 to 60 |
KY100 |
1(2)~100 |
1(2)~100 |
KY160 |
2 to 160 |
2 to 160 |
level of accuracy |
0.01 level |
|
Working medium |
Upper limit of 25 MPa or more (including 25 MPa) using di(2-ethylhexyl) sebacate; transformer oil and kerosene mixed oil below 25 MPa |
|
Piston material |
Tungsten carbide |
|
Weight material |
stainless steel |
|
Basic error |
The basic error is ±0.01% of the actual measured pressure over the entire measurement range. |
|
use |
Can be used for quantity transfer and high precision measurement |
Technical features:
● Due to the high sensitivity of the lower limit of the pressure gauge, the accuracy at the lower limit is also 0.01 level, ±0.01%. It has the advantage of "wide range".
● Both the piston and the piston cylinder are made of tungsten carbide material and polished by special process, which not only has small temperature error, but also has small piston falling speed, long free rotation of the piston and long service life.
● The upper limit is more than 25MPa pressure gauge, the working medium is di(ethylhexyl) sebacate, the viscosity is 20-25mm2/s at 20 °C, the sensitivity of the pressure gauge is greatly improved; the working medium transformer below 25MPa Oil and kerosene mixed oil.
● The weight is directly attached to the piston through the hanging basket, which avoids the additional vertical force brought by the ball bearing device and the sliding bearing device. At the same time, the center of gravity of the weight makes the pressure gauge run smoothly at the bottom end of the piston, and the indication value is accurate.
● The piston's up and down stroke is ±1.5mm. It is displayed with displacement sensor and instrument, which is sensitive, eye-catching and accurate.
The certificate of China Institute of Metrology or Shanghai Metrology and Testing Institute is attached to the factory.
Phone:021一57733878 54385897
Fax:021一57733879一802
Hotline